Siemens 6AG1124-1MC01-4AX0 Industrial Automation Component

Part number

6AG1124-1MC01-4AX0

Brand

Siemens

Category

HMI Panels

Product type

SIPLUS HMI KP1200 Comfort based on 6AV2124-1MC01-0AX0 with conformal coating, 0

Lifecycle

Phase Out Announce

Dimensions

52.00 x 40.5 x 17.00 cm

Net weight

5.679 Kg

Source category

SIPLUS Comfort Panels Standard

• The product class designation indicates specific handling requirements due to its review-restricted status during this lifecycle phase.
• Conformal coating application provides additional protection against moisture, dust, and corrosive agents present in industrial atmospheres.
• Operational temperature range extends to zero degrees Celsius, supporting functionality in cooler ambient environment conditions.
• Physical dimensions measure fifty-two centimeters in width, forty point five centimeters in depth, and seventeen centimeters in height.
• Net weight records at five point six seven nine kilograms, reflecting the density of materials used in construction.
• Lifecycle status shows Phase Out Announcement, indicating a transition period for this specific hardware configuration model.

• Base model reference links to 6AV2124-1MC01-0AX0, establishing the foundational hardware architecture for this specialized variant.
• SIPLUS branding denotes modifications made specifically for harsher industrial environments beyond standard commercial specifications.
• KP1200 Comfort classification identifies the screen size and interface complexity level inherent in the panel design.
• Conformal coating specification distinguishes this unit from standard versions through its enhanced surface protection layering.

Parameters are factual source fields retained for model review.

• Dimensional data confirms a footprint listed for standard mounting configurations found in typical industrial control cabinets.
• Weight specification suggests robust internal construction necessary to support the added protective coating materials effectively.
• Temperature rating of zero degrees Celsius indicates capability for environments where condensation or cold starts occur.
• Product class restriction implies that handling procedures must follow specific guidelines outlined in project documentation reviews.
• Lifecycle phase requires careful planning for integration projects to align with long-term maintenance and support strategies.

• Visual inspection should confirm the presence of conformal coating indicators on internal circuit boards upon opening.
• Label verification must match the part number 6AG1124-1MC01-4AX0 exactly to ensure correct component identification.
• Physical condition assessment should note any signs of wear that might affect the integrity of protective layers.
• Mounting hole alignment checks are recommended to verify application context with existing panel cutouts in control enclosures.

• Gather current project specifications requiring environmental resistance to justify the selection of this specialized SIPLUS model.
• Verify existing control system architecture to ensure seamless integration with the KP1200 Comfort interface capabilities.
• Document required operating temperatures to confirm that the zero-degree Celsius lower limit meets site conditions.
• Prepare technical questions regarding the review-restricted product class to clarify handling protocols with relevant contacts.

• Confirm that the Phase Out Announcement status does not conflict with long-term project lifecycle requirements.
• Ensure all dimensional constraints fit within the designated space allocated for the new control panel installation.
• Review the product class restrictions to understand any special handling or contact procedures needed for acquisition.
• Validate that the conformal coating benefits align with the specific environmental challenges present at the installation site.