Siemens 6AG1040-1LA01-2AA0 SIPLUS SINAMICS S120 Control Unit

Part number

6AG1040-1LA01-2AA0

Brand

Siemens

Category

Drives & Motion

Product type

Drives & Motion

Lifecycle

Active Product

Dimensions

75.00 x 73.00 x 191.00 mm

Net weight

0.95 Kg

Source category

SIPLUS Control Units CU310-2 for single-axis drives

• Physical dimensions are recorded as 75.00 x 73.00 x 191.00 mm for precise mounting planning. Keep dimensions 75.00 x 73.00 x 191.00 mm and net weight 0.95 Kg unchanged while comparing project documents and product image evidence.
• Net weight is listed at 0.95 Kg, facilitating straightforward handling and installation procedures.
• Operating temperature range spans from -20°C to +55°C for extended environmental adaptability.
• Conformal coating provides additional protection against moisture, dust, and corrosive industrial atmospheres.
• PROFINET interface enables high-speed data exchange within industrial Ethernet network architectures.
• CompactFlash card slot is excluded from this specific configuration variant for streamlined operation.

• Base model originates from the 6SL3040-1LA01-0AA0 series for consistent architectural lineage. Use the source path Drive technology / SIPLUS SINAMICS S120 / SIPLUS Control Units CU310-2 for single-axis drives to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• SIPLUS designation indicates enhanced ruggedness for severe industrial environment compliance requirements.
• CU310-2 classification identifies the specific control unit type within the SINAMICS family.
• PN suffix confirms the presence of PROFINET interface capabilities for network integration.

Parameters are factual source fields retained for model review.

• Lifecycle status is currently active, indicating ongoing production and support review details. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1040-1LA01-2AA0 record before publication.
• Product class B suggests restricted review notes requiring direct review contacts consultation.
• Single-axis drive focus defines the primary application scope for this unit.
• Interface type specifies PROFINET as the standard communication protocol for connectivity.
• Coating specification highlights the protective measures taken for harsh condition resilience.

• Visual inspection should confirm the presence of PROFINET connector ports on the unit. Review Siemens 6AG1040-1LA01-2AA0 as Drives & Motion with source category SIPLUS Control Units CU310-2 for single-axis drives, recorded lifecycle Active Product, and submitted model identity.
• Label verification is recommended to ensure the part number matches 6AG1040-1LA01-2AA0 exactly.
• Physical condition assessment should check for any visible damage to the housing.
• Connector integrity review ensures all interface points are undamaged and functional.

• Gather detailed project specifications including voltage requirements and communication protocols needed. Keep dimensions 75.00 x 73.00 x 191.00 mm and net weight 0.95 Kg unchanged while comparing project documents and product image evidence.
• Document the operating environment conditions to verify suitability for the temperature range.
• Prepare mounting diagrams to ensure physical dimensions align with existing infrastructure plans.
• List any specific interface requirements to confirm PROFINET application context with your network.

• Verify all technical parameters against your specific project documentation before submission.
• Consult with Siemens review contacts regarding the Class B review restriction policy.
• Ensure environmental conditions match the -20°C to +55°C operating temperature range.
• Confirm PROFINET interface requirements align with your existing network infrastructure setup.