6AU1400-7AA05-0AA0 SIMOTION Drive-based Backplane Mounting Plate

Part number

6AU1400-7AA05-0AA0

Brand

Siemens

Category

Drives & Motion

Product type

SIMOTION Drive-based Backplane Mounting Plate

Lifecycle

Phase Out Announce

Net weight

0.38 Kg

• Product classification identifies this item as a SIMOTION Drive-based Backplane Mounting Plate. Keep dimensions Not recorded and net weight 0.38 Kg unchanged while comparing project documents and product image evidence.
• The net weight of the unit is recorded at 0.38 Kg for logistical planning.
• Lifecycle status indicates a Phase Out Announce condition for this specific part number.
• Dimensions are listed as Not recorded in the current source documentation records.
• The brand associated with this component is Siemens, a known industrial technology provider.
• It is categorized under drives-motion for organizational purposes within industrial spare parts databases.

• The primary part number for this mounting plate is 6AU1400-7AA05-0AA0. Use the source path drives-motion to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Normalized representation removes hyphens, resulting in the identifier 6AU14007AA050AA0.
• This plate is specifically intended for SIMOTION D410 and D410-2 series units.
• The design supports independent mounting locations distinct from the main power module.

Parameters are factual source fields retained for model review.

• Review the submitted model details to confirm alignment with your project requirements. Check product-owned images, label text, connector area, and submitted model references against the exact 6AU1400-7AA05-0AA0 record before publication.
• Source parameter review indicates the net weight is precisely 0.38 Kg.
• Check the lifecycle status which shows a Phase Out Announce designation.
• Note that physical dimensions are not currently recorded in the provided data.
• Verify the brand attribution to Siemens for compliance with your sourcing standards.

• Ensure images clearly display the 6AU1400-7AA05-0AA0 label on the plate surface. Review Siemens 6AU1400-7AA05-0AA0 as SIMOTION Drive-based Backplane Mounting Plate with source category drives-motion, recorded lifecycle Phase Out Announce, and submitted model identity.
• Visuals should show the mounting points relevant for SIMOTION D410 installation.
• Include close-ups of the backplane interface for detailed technical verification.
• Provide context shots showing the plate relative to standard industrial rack sizes.

• Prepare your project documentation specifying the need for SIMOTION D410 mounting. Keep dimensions Not recorded and net weight 0.38 Kg unchanged while comparing project documents and product image evidence.
• Confirm whether the Phase Out Announce status impacts your long-term strategy.
• List any specific environmental constraints that might affect the 0.38 Kg unit.
• Define the required distance between the drive and power module in your setup.

• Cross-reference the part number 6AU1400-7AA05-0AA0 with your internal asset lists. Check product-owned images, label text, connector area, and submitted model references against the exact 6AU1400-7AA05-0AA0 record before publication.
• Assess the implications of the Phase Out Announce lifecycle stage for your team.
• Validate the weight specification of 0.38 Kg against your shipping calculations.
• Document the lack of dimension data for future engineering reference needs.