Siemens 6ES7648-2AK81-0RA0 Memory Expansion Module Inquiry

Part number

6ES7648-2AK81-0RA0

Brand

Siemens

Category

Industrial PCs

Product type

Industrial PCs

Lifecycle

Active Product

Dimensions

18.9 x 12.1 x 3.4 cm

Net weight

0.3 Kg

• Memory capacity is listed as 32 GB, delivered via a single 32 GB module configuration. Keep dimensions 18.9 x 12.1 x 3.4 cm and net weight 0.3 Kg unchanged while comparing project documents and product image evidence.
• The data transfer rate is specified as 3200 MHz, classified under SD-RAM standards for consistent performance.
• Physical dimensions are recorded as 18.9 cm in length, 12.1 cm in width, and 3.4 cm in height.
• Net weight is documented at 0.3 Kg, indicating a lightweight design listed for dense packaging.
• The product class indicates review restrictions, requiring direct contact with designated Siemens review contacts for processing.
• Lifecycle status is confirmed as Active Product, meaning the item remains in current production and support phases.

• The part number 6ES7648-2AK81-0RA0 uniquely identifies this specific memory module variant within the Siemens portfolio.
• Normalized representation appears as 6ES76482AK810RA0, facilitating standardized database entries and search indexing procedures.
• Brand attribution is clearly assigned to Siemens, reflecting the manufacturer of record for this industrial component.
• Category classification places this item under Industrial PCs, aligning it with broader system integration contexts.

Parameters are factual source fields retained for model review.

• Source documentation lists application context with SIMATIC Box IPC BX-39A models for hardware expansion purposes.
• Panel IPC PX-39A units are also noted as supported platforms for this specific memory module installation.
• Module type is defined as SODIMM, which dictates the physical slot requirements and connection interface.
• Technology generation is DDR4, ensuring alignment with modern processing speeds and power efficiency standards.
• Capacity configuration is fixed at 1x 32 GB, providing a singular high-density memory solution.

• Visual representations should display the SODIMM form factor clearly to aid in physical identification.
• Labeling on the module typically includes the full part number for verification during manual inspection.
• Connector pins must be visible to confirm the specific interface type used for data transmission.
• Overall condition indicators help assess whether the unit matches the active product lifecycle status.

• Review project documents to confirm the target system supports the specified 3200 MHz DDR4 standard.
• Verify that the SIMATIC Box or Panel IPC model accepts the recorded physical dimensions accurately.
• Check internal space constraints to ensure the 0.3 Kg weight does not impact structural balance.
• Prepare specific questions regarding the review restriction policy mentioned in the product class description.

• Confirm the active product status before initiating any detailed technical discussions or inquiry preparation planning steps.
• Note the review restriction class, as this may influence how the item is handled post-delivery.
• Cross-reference the normalized part number to ensure accurate matching within internal inventory management systems.
• Ensure all inquiry submissions include the exact part number for precise tracking and response handling.