6ES7648-2AJ70-0MA0 Industrial PC Memory Expansion Module

Part number

6ES7648-2AJ70-0MA0

Brand

Siemens

Category

Industrial PCs

Product type

Industrial PCs

Lifecycle

Active Product

Dimensions

18.7 x 12.1 x 3.7 cm

Net weight

0.078 Kg

• Memory capacity is listed as 8 GB, utilizing a single 8 GB module configuration. Keep dimensions 18.7 x 12.1 x 3.7 cm and net weight 0.078 Kg unchanged while comparing project documents and product image evidence.
• The RAM type is specified as DDR3-1600 SD-RAM, operating at standard speeds.
• Physical form factor is identified as a Dual Inline Memory Module (DIMM) style.
• Net weight is recorded at 0.078 Kg, indicating a lightweight component design.
• Dimensions are noted as 18.7 x 12.1 x 3.7 cm for spatial planning.
• Lifecycle status is defined as Active Product, confirming current manufacturing or support.

• Part number 6ES7648-2AJ70-0MA0 uniquely identifies this specific memory expansion hardware unit. Use the source path industrial-pcs to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Normalized part number 6ES76482AJ700MA0 is used for consistent database indexing and retrieval.
• Brand attribution is clearly assigned to Siemens within the industrial control sector.
• Product classification falls under the broader category of Industrial PCs and components.

Parameters are factual source fields retained for model review.

• Source parameter review indicates application context with SIMATIC Rack IPC547E systems. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7648-2AJ70-0MA0 record before publication.
• Documentation lists support for SIMATIC IPC647D and IPC847D rack-mounted configurations.
• Box IPC627D and IPC827D models are also referenced in the specification sheet.
• Panel IPC677D units are included in the list of supported panel PC models.
• Technical specifications align with standard DDR3 memory requirements for these industrial platforms.

• Visual inspection should confirm the DIMM connector pins and module labeling. Review Siemens 6ES7648-2AJ70-0MA0 as Industrial PCs with source category industrial-pcs, recorded lifecycle Active Product, and submitted model identity.
• Check for physical damage to the circuit board edges and contact points.
• Verify that the part number label matches the 6ES7648-2AJ70-0MA0 identifier exactly.
• Ensure the module dimensions fit within the designated slot of the host PC.

• Prepare project documents detailing the specific SIMATIC IPC model requiring memory expansion. Keep dimensions 18.7 x 12.1 x 3.7 cm and net weight 0.078 Kg unchanged while comparing project documents and product image evidence.
• Review technical specifications to ensure DDR3-1600 speed meets your system requirements.
• Confirm physical space constraints match the 18.7 x 12.1 x 3.7 cm dimensions.
• Submit inquiry with part number 6ES7648-2AJ70-0MA0 for accurate sourcing and verification.

• Product class B indicates review restrictions; contact manufacturer for specific guidance.
• Always verify the exact model variant before initiating any inquiry preparation discussions.
• Source parameter review is essential to confirm application context with existing infrastructure.
• Project document review helps ensure the memory module meets operational demands.