Siemens 6ES7648-1AA10-2YB0 Portrait Mounting Kit for Box IPC627E

Part number

6ES7648-1AA10-2YB0

Brand

Siemens

Category

Industrial PCs

Product type

Industrial PCs

Lifecycle

Active Product

Dimensions

41.5 x 36.00 x 17.9 cm

Net weight

2.618 Kg

• This unit is classified under the broader category of industrial personal computers and related peripheral hardware components.
• The product lifecycle status is listed as Active Product, indicating current manufacturing or distribution records exist.
• Physical dimensions are recorded as 41.5 centimeters in width, 36.00 centimeters in height, and 17.9 centimeters in depth.
• The net weight of the mounting assembly is documented at 2.618 kilograms for logistical and handling reference.
• It is engineered for portrait orientation mounting on the front panel of the designated Box IPC627E model.
• The kit accommodates two expansion slots, providing structural support for the specified industrial PC configuration.

• The manufacturer brand associated with this part number is Siemens, a recognized entity in industrial automation.
• The specific product type is identified as an accessory for Industrial PCs rather than a standalone computing unit.
• The part number 6ES7648-1AA10-2YB0 serves as the primary unique identifier for this specific mounting solution.
• No additional product class designation is provided in the source data for this particular hardware component.

Parameters are factual source fields retained for model review.

• Width measurement is precisely 41.5 cm, defining the horizontal footprint required for the mounting space.
• Height dimension is listed as 36.00 cm, establishing the vertical extent of the portrait orientation setup.
• Depth specification is recorded at 17.9 cm, indicating the protrusion or clearance needed behind the panel.
• Net weight is stated as 2.618 Kg, which is relevant for structural load calculations during installation.
• Slot capacity is defined as two slots, aligning with the internal expansion requirements of the host PC.

• Visual documentation should clearly display the front-facing portrait orientation of the mounting bracket assembly.
• Images must show the two-slot configuration area where expansion cards or interfaces would typically reside.
• Reference photos ought to highlight the PC interface output locations on the front side of the unit.
• Dimensional overlays in images can assist in verifying spatial requirements against the 41.5 x 36.00 x 17.9 cm specs.

• Verify the exact model of the Box IPC627E to ensure the portrait mounting kit aligns with its chassis.
• Confirm the required slot count matches the two-slot specification provided in the product description details.
• Check physical clearance dimensions against the installation site to accommodate the 41.5 x 36.00 x 17.9 cm size.
• Review project documents to ensure the net weight of 2.618 Kg is supported by the mounting surface.

• Ensure the inquiry form includes the full part number 6ES7648-1AA10-2YB0 for accurate identification processing.
• Cross-reference the active product status with current project timelines to confirm relevance for immediate needs.
• Validate that the portrait mounting requirement matches the intended installation orientation in the control cabinet design.
• Document the dimensional constraints in the project file to prevent spatial conflicts during the physical assembly phase.