6ES7511-1UL03-0AB0 SIMATIC S7-1500T CPU 1511TF-1 PN

Part number

6ES7511-1UL03-0AB0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

CPU 1511TF-1 PN

Lifecycle

Active Product

Dimensions

14.8 x 15.2 x 4.5 cm

Net weight

0.38 Kg

Source category

CPU 1511TF-1 PN

• Work memory allocation includes 450 KB for program storage and 1.5 MB dedicated to data handling within the central processing unit architecture.
• The first communication interface utilizes PROFINET IRT technology, featuring a built-in two-port switch for robust network integration and data exchange.
• Bit performance is recorded at 6 nanoseconds, ensuring rapid execution of control logic and supporting high-frequency switching operations in automation environments.
• Physical dimensions are listed as 14.8 x 15.2 x 4.5 centimeters, providing a compact form factor listed for standard DIN rail mounting configurations.
• Net weight is specified at 0.38 kilograms, contributing to manageable installation procedures while maintaining structural integrity for industrial cabinet deployments.
• A SIMATIC Memory Card is required for operation, serving as essential storage for firmware, configuration data, and diagnostic information during system runtime.

• The product type is explicitly identified as CPU 1511TF-1 PN, indicating its classification within the SIMATIC S7-1500T technology controller family.
• Brand attribution is confirmed as Siemens, aligning with the manufacturer's standard nomenclature for industrial automation hardware components and control systems.
• The part number 6ES7511-1UL03-0AB0 serves as the primary unique identifier for this specific model configuration and revision level.
• Normalized part number formatting removes hyphens to 6ES75111UL030AB0, facilitating consistent database indexing and electronic catalog search operations.

Parameters are factual source fields retained for model review.

• Memory capacity parameters show 450 KB for programs and 1.5 MB for data, defining the operational limits for application logic storage.
• Interface specifications highlight PROFINET IRT with dual ports, establishing the communication protocol standards for real-time Ethernet networking connections.
• Performance metrics indicate a 6 ns bit processing speed, which is critical for evaluating suitability in high-speed motion control scenarios.
• Dimensional data records 14.8 x 15.2 x 4.5 cm, allowing engineers to verify spatial constraints within control panel layouts.
• Weight specification of 0.38 kg assists in calculating load requirements for mounting rails and assessing shipping logistics for hardware components.

• Visual documentation should display the front panel indicators and PROFINET port layout for accurate physical identification of the unit.
• Side views may illustrate the card slot area where the SIMATIC Memory Card is inserted for system boot and data retention.
• Rear perspectives can confirm the mounting clip mechanism and terminal block connections relevant to electrical installation procedures.
• Label close-ups are recommended to verify the printed part number and brand markings against the provided source documentation.

• Review project documents to confirm that the 450 KB program memory meets the specific application logic requirements.
• Verify that the PROFINET IRT interface aligns with the existing network infrastructure and switch topology plans.
• Ensure that a application context SIMATIC Memory Card is included or request separately, as it is mandatory for operation.
• Check dimensional constraints in the control cabinet design to ensure the 14.8 x 15.2 x 4.5 cm footprint fits.

• Confirm the active product status to ensure ongoing support and documentation review details for the specified hardware model.
• Cross-reference the normalized part number to avoid discrepancies when submitting inquiries through electronic inquiry preparation channels.
• Validate that the memory card requirement is understood, as omission may prevent initial system startup or configuration.
• Assess the 6 ns bit performance against motion control cycle times to ensure compliance with strict timing demands.