Siemens 6ES7212-1BE40-0XB0 CPU 1212C Inquiry

Part number

6ES7212-1BE40-0XB0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

CPU 1212C

Lifecycle

Active Product

Dimensions

10.7 x 10.3 x 8.5 cm

Net weight

0.374 Kg

Source category

CPU 1212C

• Integrated digital inputs include eight channels operating at 24 V DC for standard sensor connections. Keep dimensions 10.7 x 10.3 x 8.5 cm and net weight 0.374 Kg unchanged while comparing project documents and product image evidence.
• Six digital outputs utilize relay technology capable of switching loads up to two amperes each.
• Two analog input channels accept voltage signals ranging from zero to ten volts DC for precise measurement.
• Program and data memory capacity totals one hundred kilobytes for storing logic and process information.
• Power supply requirements specify alternating current between eighty-five and two hundred sixty-four volts.
• Operating frequency range accommodates standard electrical grids at forty-seven to sixty-three hertz without issue.

• The part number 6ES7212-1BE40-0XB0 identifies this specific configuration of the CPU 1212C series. Use the source path Automation technology / Central processing units / Standard CPUs / CPU 1212C to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Lifecycle status is recorded as an active product within the manufacturer's current portfolio listings.
• Physical dimensions are listed as ten point seven by ten point three by eight point five centimeters.
• Net weight is documented at zero point three seven four kilograms for shipping and mounting calculations.

Parameters are factual source fields retained for model review.

• Source parameters indicate the device belongs to the standard CPU class within automation technology categories. Check product-owned images, label text, connector area, and submitted model references against the exact 6ES7212-1BE40-0XB0 record before publication.
• Onboard I/O configuration combines discrete digital signals with limited analog processing for basic control tasks.
• Memory allocation supports moderate program sizes listed for standalone control or small networked systems.
• Electrical specifications align with common industrial AC power standards found in many global facilities.

• Visual inspection should confirm the presence of terminal blocks for power and signal connections. Review Siemens 6ES7212-1BE40-0XB0 as CPU 1212C with source category CPU 1212C, recorded lifecycle Active Product, and submitted model identity.
• Labeling on the front panel must clearly display the full alphanumeric part identifier code.
• Status LEDs typically indicate operational state, error conditions, and communication activity on the module face.
• Mounting rail attachment points should be visible on the rear side of the housing unit.

• Verify that the required onboard I/O count meets the specific demands of your control design.
• Confirm power supply voltage matches the eight-five to two-sixty-four volt AC specification provided.
• Check physical space constraints against the recorded dimensions to ensure proper enclosure fitment.
• Review program memory requirements to ensure one hundred kilobytes suffices for your application logic.

• All technical data presented originates directly from the manufacturer's published product specification sheets.
• Users should cross-reference these parameters with their own engineering documentation before finalizing inquiries.
• Physical appearance may vary slightly based on regional manufacturing batches or revision updates over time.
• For detailed integration guidance, consult the documented programming manual associated with the S7-1200 series.