
Siemens 6ES7194-2LH50-0AA0 Bus Cable for ET 200AL Systems
This entry covers the Siemens 6ES7194-2LH50-0AA0 bus cable designed for industrial automation networks. The component features assembled M8 connectors for reliable signal transmission in active product lines.
Quick Facts
- Part number
- 6ES7194-2LH50-0AA0
- Brand
- Siemens
- Category
- Cables, Connectors & Accessories
- Product type
- Cables and connectors
- Lifecycle
- Active Product
- Dimensions
- 23.8 x 20.5 x 3.4 cm
- Net weight
- 0.215 Kg
- Source category
- Cables and connectors
Product Overview
The Siemens 6ES7194-2LH50-0AA0 is a specialized bus cable intended for connecting components within the SIMATIC ET 200AL automation family. It provides a structured link for data exchange in industrial environments. Review Siemens 6ES7194-2LH50-0AA0 as Cables and connectors with source category Cables and connectors, recorded lifecycle Active Product, and submitted model identity.
Recorded under the cables and connectors category, this item utilizes M8 interface technology to ensure secure physical connections. The design supports 4-pole shielding for enhanced noise immunity during operation.
Technical Review Notes
- The cable assembly includes two M8 connectors pre-installed at each end for immediate integration into control systems. Keep dimensions 23.8 x 20.5 x 3.4 cm and net weight 0.215 Kg unchanged while comparing project documents and product image evidence.
- A four-pole configuration allows for simultaneous power and signal transmission across the connected industrial devices.
- Shielding is incorporated throughout the cable length to protect against electromagnetic interference in busy factory floors.
- The total length of the cable is specified as five meters, providing sufficient reach for standard rack setups.
- Connectors are assembled on both ends, ensuring consistent termination quality and reducing field installation variables.
- The product classifies as an active component within the broader SIMATIC ET 200AL accessory portfolio structure.
Model Identification
- Identify the unit by the full part number 6ES7194-2LH50-0AA0 found on manufacturer labeling and documentation.
- Cross-reference the normalized identifier 6ES71942LH500AA0 when searching internal databases or technical specification sheets.
- Verify the brand association with Siemens to confirm origin and adherence to specific industrial standards.
- Check the lifecycle status listed as Active Product to ensure continued support and documentation review details.
Technical Parameters
| Product type | Cables and connectors |
|---|---|
| Lifecycle | Active Product |
| Dimensions | 23.8 x 20.5 x 3.4 cm |
| Net weight | 0.215 Kg |
| Source category | Cables and connectors |
Parameters are factual source fields retained for model review.
Parameter Review
- Physical dimensions are recorded as 23.8 centimeters in length, 20.5 centimeters in width, and 3.4 centimeters in height.
- The net weight of the packaged item is listed at 0.215 kilograms for logistics and handling calculations.
- Source parameter review indicates the cable length is fixed at 5.0 meters for specific application needs.
- Connector type is defined as M8, assembled on both ends, supporting a 4-pole electrical configuration.
- Shielding characteristics are noted as essential for maintaining signal integrity in electrically noisy industrial automation settings.
Catalog Classification
Image & Label Review
- Visual inspection should confirm the presence of two M8 connectors attached to the cable extremities.
- Check that the cable body appears intact with visible shielding layers if the outer jacket is removed.
- Ensure the product label displays the correct part number 6ES7194-2LH50-0AA0 for accurate identification purposes.
- Verify packaging dimensions align with the stated 23.8 x 20.5 x 3.4 cm specifications for storage.
Product Image Gallery

Inquiry Preparation
- Gather project requirements specifying the need for a 5-meter M8 bus cable for ET 200AL systems.
- Confirm the necessity for 4-pole shielding to meet electromagnetic application context standards in your facility.
- Prepare technical drawings showing connector placement and cable routing distances for the installation team.
- Document the exact part number 6ES7194-2LH50-0AA0 in all correspondence to avoid specification errors.
Category Context
This item resides within the Automation technology sector, specifically under the SIMATIC ET 200AL product line.
It falls under the Accessories sub-category, further classified within Cables and connectors for network infrastructure.
Review Notes
- Validate the physical condition of connectors upon receipt to ensure no pin damage occurred during transit.
- Test the electrical continuity of the four poles to verify proper shielding and connection integrity.
- Compare the delivered item against the source category path to confirm correct product classification accuracy.
- Update internal inventory records with the net weight and dimensions for future logistical planning purposes.



