Siemens 6AG2223-0BD30-1XB0 SIPLUS S7-1200 Digital I/O Module Inquiry

Part number

6AG2223-0BD30-1XB0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

PLC CPUs & Controllers

Lifecycle

Active Product

Dimensions

8.1 x 5.00 x 3.00 cm

Net weight

0.028 Kg

Source category

SIPLUS S7-1200 SB 1223 RAIL

• The module provides two digital inputs rated at 24 V DC for signal acquisition. Keep dimensions 8.1 x 5.00 x 3.00 cm and net weight 0.028 Kg unchanged while comparing project documents and product image evidence.
• It includes two digital outputs also rated at 24 V DC for actuator control.
• Physical dimensions are recorded as 8.1 cm by 5.00 cm by 3.00 cm for space planning.
• Net weight is listed as 0.028 Kg for logistics and handling calculations.
• The product lifecycle status is currently active according to manufacturer classification records.
• Conformal coating is applied to ensure durability in extreme industrial environments.

• The base model reference is 6ES7223-0BD30-0XB0 for architectural comparison purposes. Use the source path SIPLUS extreme RAIL digital modules / SIPLUS S7-1200 SB 1223 RAIL to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• SIPLUS extreme designation indicates enhanced protection against environmental stress factors.
• Rail mounting configuration allows integration into standard S7-1200 controller racks.
• Digital input/output count remains consistent with the underlying base hardware design.

Parameters are factual source fields retained for model review.

• Operating temperature limits are defined between minus twenty-five and plus fifty-five degrees Celsius. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG2223-0BD30-1XB0 record before publication.
• Overtemperature tolerance allows temporary peaks up to seventy degrees Celsius for ten minutes.
• Input voltage specification is fixed at twenty-four volts direct current for logic signals.
• Output voltage specification matches the input rating at twenty-four volts direct current.
• Class B review restriction requires contacting the designated Siemens review contacts for handling.

• Visual inspection should confirm the presence of protective conformal coating on surfaces. Review Siemens 6AG2223-0BD30-1XB0 as PLC CPUs & Controllers with source category SIPLUS S7-1200 SB 1223 RAIL, recorded lifecycle Active Product, and submitted model identity.
• Labeling must clearly display the full part number for accurate identification.
• Connector pins should be examined for integrity before submission of inquiry details.
• Mounting rails and screw terminals need verification against project mechanical drawings.

• Review project documentation to verify environmental temperature requirements match module specifications. Keep dimensions 8.1 x 5.00 x 3.00 cm and net weight 0.028 Kg unchanged while comparing project documents and product image evidence.
• Confirm digital input and output counts align with control system architecture needs.
• Check if conformal coating meets specific industry standards for your application site.
• Prepare technical questions regarding the Class B review restriction process for clarity.

• Ensure all technical parameters are cross-referenced with current engineering project requirements.
• Verify that the active product status remains valid for long-term deployment plans.
• Consider the physical dimensions when designing enclosure layouts for the control cabinet.
• Document any specific environmental constraints to justify the selection of this SIPLUS unit.