Inquiry for Siemens 6AG1992-1AM00-7AA0 SCALANCE X Accessory

Part number

6AG1992-1AM00-7AA0

Brand

Siemens

Category

Cables, Connectors & Accessories

Product type

SIPLUS NET SCALANCE X SFP992-1LD based on 6GK5992-1AM00-8AA0 with conformal coating, -40…+85 °C, SCALANCE X accessory

Lifecycle

Active Product

Dimensions

10.7 x 5.7 x 2.00 cm

Net weight

0.035 Kg

• The device operates as a single-mode optical transceiver with a maximum range of ten kilometers. Keep dimensions 10.7 x 5.7 x 2.00 cm and net weight 0.035 Kg unchanged while comparing project documents and product image evidence.
• It features one LC port supporting data transmission rates of up to one thousand megabits per second.
• Extended temperature tolerance allows functionality within a range of minus forty to plus eighty-five degrees Celsius.
• Conformal coating is applied to protect internal components against moisture, dust, and corrosive substances.
• The physical dimensions are recorded as ten point seven by five point seven by two centimeters.
• Net weight is listed at zero point zero three five kilograms for logistical planning purposes.

• The primary part number for this specific industrial accessory is 6AG1992-1AM00-7AA0. Use the source path cables-connectors-accessories to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• This model is classified under the broader SIPLUS NET SCALANCE X product family series.
• It serves as an accessory component rather than a standalone switch or controller unit.
• The base technology derives from the 6GK5992-1AM00-8AA0 platform with added environmental protections.

Parameters are factual source fields retained for model review.

• Verify the optical interface type matches your existing network infrastructure requirements before submission. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1992-1AM00-7AA0 record before publication.
• Confirm that the extended temperature range meets the operational standards of your installation site.
• Check the single-mode fiber specification to ensure application context with your current cabling setup.
• Review the physical dimensions to confirm adequate space within your enclosure or rack layout.
• Note the net weight for accurate shipping and handling calculations during project planning phases.

• Images typically display the compact form factor of the small form-factor pluggable module. Review Siemens 6AG1992-1AM00-7AA0 as cables connectors accessories with source category cables-connectors-accessories, recorded lifecycle Active Product, and submitted model identity.
• Visuals may highlight the LC connector interface used for fiber optic cable attachment.
• Labeling on the unit usually indicates the full part number for easy identification.
• Protective coating details might be visible as a uniform layer on the housing surface.

• Prepare your project documentation specifying the required quantity and intended application environment details.
• Include any specific technical questions regarding the conformal coating durability or temperature limits.
• Reference the base model 6GK5992-1AM00-8AA0 if comparing performance metrics with standard units.
• Ensure all contact information is accurate to facilitate direct communication with support teams.

• This product carries a review restriction requiring direct contact with Siemens representatives.
• Lifecycle status is currently active, indicating ongoing production and support review details.
• Technical parameters should be cross-referenced with documented Siemens documentation for final validation.
• Inquiries are processed based on the specific needs outlined in the submission form.