6AG1964-2AA04-7AB0 SIPLUS S7-400 IF 964-DP Interface Module

Part number

6AG1964-2AA04-7AB0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

SIPLUS S7-400 IF 964-DP based on 6ES7964-2AA04-0AB0 with conformal coating, -25…+70 °C, interface module DP master

Lifecycle

Active Product

Dimensions

22.00 x 11.5 x 3.8 cm

Net weight

0.133 Kg

Source category

SIPLUS S7-400 interface modules

• This interface module operates as a DP master, facilitating communication within PROFIBUS DP networks for industrial control applications.
• The product class is designated as B, indicating it is review restricted and requires direct contact with Siemens review contacts.
• Conformal coating is applied to the internal components to protect against moisture, dust, and other environmental contaminants.
• The device supports an extended operating temperature range from -25°C up to +70°C for diverse industrial settings.
• Physical dimensions are listed as 22.00 x 11.5 x 3.8 cm, providing a compact form factor for integration.
• Net weight is recorded at 0.133 Kg, contributing to lightweight design considerations for panel mounting or rack installation.

• The part number 6AG1964-2AA04-7AB0 identifies this specific SIPLUS variant distinct from standard S7-400 interface modules.
• It is categorized under SIPLUS S7-400 interface modules, differentiating it from standard CPU or I/O modules.
• The base model reference 6ES7964-2AA04-0AB0 indicates the underlying hardware architecture upon which this SIPLUS version is built.
• Lifecycle status is confirmed as Active Product, meaning the item remains part of the current Siemens product portfolio.

Parameters are factual source fields retained for model review.

• Source parameter review confirms the interface module type is specifically configured for DP master functionality in network topologies.
• Dimensional data shows a width of 22.00 cm, depth of 11.5 cm, and height of 3.8 cm for spatial planning.
• Weight specification of 0.133 Kg allows for precise load calculations when designing support structures or mounting racks.
• Temperature rating of -25 to +70 °C ensures suitability for environments with significant thermal fluctuations or heat exposure.
• Coating type is specified as conformal coating, offering protection against humidity and particulate matter in industrial atmospheres.

• Visual inspection should verify the presence of conformal coating on internal circuit boards visible through housing openings.
• Labeling must clearly display the full part number 6AG1964-2AA04-7AB0 for accurate inventory and project documentation matching.
• Connector types should be checked to ensure they align with standard PROFIBUS DP physical layer requirements.
• Physical condition assessment should note any signs of wear or damage that might affect environmental sealing integrity.

• Review project documents to confirm the need for DP master interface capabilities within the existing network structure.
• Verify environmental conditions match the -25 to +70 °C operating range for proper module selection and deployment.
• Check dimensional constraints in the control cabinet design to ensure the 22.00 x 11.5 x 3.8 cm footprint fits.
• Contact Siemens review contacts directly due to the review-restricted product class B classification for inquiry preparation handling procedures.

• Ensure all technical specifications are cross-referenced with the latest Siemens product documentation before finalizing project requirements.
• The review restriction policy necessitates careful verification of part numbers and configuration details prior to submission.
• Environmental ratings should be validated against site-specific conditions to documented long-term operational reliability and safety.
• Consulting with documented Siemens contacts is recommended for detailed technical support regarding integration and configuration specifics.