6AG1654-7HY00-7XA0 SIPLUS S7 Bus Module for Y Coupler

Part number

6AG1654-7HY00-7XA0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

SIPLUS S7 bus module for Y coupler based on 6ES7654-7HY00-0XA0 with conformal coating, -25…+70 °C

Lifecycle

Active Product

Dimensions

10.00 x 10.00 x 6.7 cm

Net weight

0.104 Kg

Source category

SIPLUS Y-link for S7-400H

• Base architecture originates from the 6ES7654-7HY00-0XA0 component, ensuring established functional reliability. Keep dimensions 10.00 x 10.00 x 6.7 cm and net weight 0.104 Kg unchanged while comparing project documents and product image evidence.
• Conformal coating provides enhanced protection against environmental factors and potential corrosion risks.
• Operating temperature range spans from -25 °C to +70 °C for varied climates.
• Physical dimensions measure 10.00 cm by 10.00 cm with a depth of 6.7 cm.
• Net weight is recorded at 0.104 Kg, facilitating manageable handling during installation procedures.
• Lifecycle status is listed as Active Product, indicating current production and support review details.

• Identify the specific SIPLUS variant designation within the broader S7-400 product family structure. Use the source path SIPLUS S7-400 high-review details CPUs / SIPLUS Y-link for S7-400H to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Verify the Y coupler application context through the designated bus module interface specifications.
• Confirm the conformal coating application as a distinct feature of this enhanced model.
• Cross-reference the base part number 6ES7654-7HY00-0XA0 for architectural understanding and context.

Parameters are factual source fields retained for model review.

• Temperature limits are strictly defined between -25 °C and +70 °C for operation. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1654-7HY00-7XA0 record before publication.
• Dimensional data includes width, height, and depth measurements for spatial planning purposes.
• Weight specification of 0.104 Kg assists in load calculations for mounting structures.
• Product class indicates review restrictions requiring direct contact with designated Siemens representatives.
• Category placement falls under SIPLUS S7-400 high-review details CPUs and Y-link configurations.

• Visual inspection should confirm the presence of conformal coating on internal circuitry. Review Siemens 6AG1654-7HY00-7XA0 as plc cpu controllers with source category SIPLUS Y-link for S7-400H, recorded lifecycle Active Product, and submitted model identity.
• Labeling must clearly display the full part number 6AG1654-7HY00-7XA0 for verification.
• Connector interfaces should appear intact and free from physical damage or wear.
• Overall housing condition reflects the industrial-grade construction typical of SIPLUS components.

• Gather project documentation specifying the need for extended temperature range capabilities. Keep dimensions 10.00 x 10.00 x 6.7 cm and net weight 0.104 Kg unchanged while comparing project documents and product image evidence.
• Review system architecture to confirm application context with S7-400H Y coupler setups.
• Prepare technical questions regarding the conformal coating specifications and environmental ratings.
• Note the review restriction class when initiating contact with Siemens support channels.

• Ensure all dimensional constraints are met before proceeding with physical installation steps.
• Validate that the operating environment falls within the specified -25 to +70 °C range.
• Check for any specific project requirements regarding the review restricted product class.
• Confirm the base model relationship to 6ES7654-7HY00-0XA0 for technical reference accuracy.