6AG1400-2JA10-7AA0 Industrial Automation Component

Part number

6AG1400-2JA10-7AA0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

PLC CPUs & Controllers

Lifecycle

Active Product

Dimensions

58.5 x 30.00 x 4.00 cm

Net weight

3.384 Kg

Source category

SIPLUS S7-400 racks

• Constructed as a UR2-H rack, this unit provides nine mounting slots for central processing modules. Keep dimensions 58.5 x 30.00 x 4.00 cm and net weight 3.384 Kg unchanged while comparing project documents and product image evidence.
• The hardware includes conformal coating to protect internal circuitry against moisture, dust, and corrosive agents.
• Operational temperature range extends from -25 degrees Celsius up to +70 degrees Celsius for reliability.
• Physical dimensions are recorded at 58.5 centimeters in length, 30.00 centimeters in width, and 4.00 centimeters in height.
• Net weight is listed as 3.384 kilograms, facilitating standard handling procedures during installation and maintenance.
• The product class indicates it is a review-restricted item requiring direct contact with designated Siemens review contacts.

• Identify the base model lineage originating from the 6ES7400-2JA10-0AA0 specification for structural reference. Use the source path Automation technology / SIPLUS S7-400 / SIPLUS S7-400 racks to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Verify the SIPLUS designation confirms the enhanced environmental protection features integrated into the chassis design.
• Confirm the UR2-H suffix denotes the specific rack type with nine-slot capacity for module insertion.
• Cross-reference the full part number 6AG1400-2JA10-7AA0 to ensure accurate matching with project documentation requirements.

Parameters are factual source fields retained for model review.

• Review the dimensional data to confirm physical fit within existing control cabinet layouts and space constraints.
• Check the weight specification to determine appropriate lifting equipment or manual handling protocols for safe installation.
• Assess the temperature rating to ensure suitability for the specific environmental conditions of the deployment site.
• Note the slot count to verify capacity for required I/O modules and communication interface cards.
• Examine the product class restriction to understand the specific handling and review notes associated with this unit.

• Inspect the front panel for clear labeling of the part number and Siemens branding identifiers.
• Verify the presence of conformal coating indicators or protective seals on the internal module slots.
• Check the rear connector area for proper alignment and condition of the backplane bus interfaces.
• Ensure the overall chassis structure shows no visible damage or deformation that could affect module seating.

• Prepare project documents specifying the required operating environment temperatures and potential exposure to hazardous substances.
• List the specific modules intended for installation to confirm application context with the nine-slot rack configuration.
• Gather current inventory records to assess whether this component replaces an existing unit or adds capacity.
• Contact designated Siemens review contacts to discuss the review-restricted nature and specific inquiry preparation channels for this item.

• Confirm the active product lifecycle status to ensure ongoing support and documentation review details for the unit.
• Validate the source category path to ensure correct classification within the SIPLUS S7-400 racks section.
• Review all technical parameters against project specifications to avoid mismatches in environmental or physical requirements.
• Ensure all inquiry details are complete to facilitate efficient processing by the designated Siemens contact review contacts.