Siemens 6AG1214-1AG40-5XB0 SIPLUS S7-1200 Compact CPU Inquiry

Part number

6AG1214-1AG40-5XB0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

PLC CPUs & Controllers

Lifecycle

Active Product

Dimensions

11.5 x 11.00 x 8.00 cm

Net weight

0.394 Kg

Source category

SIPLUS CPU 1214C

• Power supply requirements are specified as DC 20.4 to 28.8 volts for stable controller operation. Keep dimensions 11.5 x 11.00 x 8.00 cm and net weight 0.394 Kg unchanged while comparing project documents and product image evidence.
• Onboard digital inputs include fourteen channels rated for 24 volts DC signal processing.
• Digital output configuration provides ten channels capable of switching loads at 24 volts DC.
• Analog input section features two channels supporting voltage signals ranging from zero to ten volts.
• Program and data memory capacity is recorded at one hundred kilobytes for application storage needs.
• Physical dimensions measure eleven point five by eleven point zero by eight point zero centimeters.

• The base model reference is 6ES7214-1AG40-0XB0, indicating the standard variant without environmental enhancements.
• The SIPLUS prefix denotes specialized industrial grade construction with additional protective measures for longevity.
• Conformal coating is applied to the printed circuit board to resist humidity and chemical exposure.
• Temperature rating extensions differentiate this model from standard indoor-only automation controllers in the market.

Parameters are factual source fields retained for model review.

• Verify that the DC power supply range matches the twenty point four to twenty eight point eight volt specification.
• Confirm the load types connected to the ten digital outputs align with the twenty four volt DC rating.
• Ensure analog sensors provide signals within the zero to ten volt range for the two input channels.
• Check that the installation environment temperature stays within the negative forty to positive sixty degree limits.
• Review the memory requirements against the one hundred kilobyte limit for program and data storage capacity.

• Inspect the physical label for the exact part number six AG one two one four dash one AG four zero dash five XB zero.
• Examine the connector blocks for any signs of damage or corrosion before proceeding with integration steps.
• Note the LED indicators on the front panel which display operational status and fault conditions clearly.
• Compare the mounting rail interface with existing cabinet structures to ensure proper mechanical fitment alignment.

• Gather all relevant project documents specifying the environmental conditions where this controller will be installed.
• Prepare detailed wiring diagrams showing connections for the fourteen digital inputs and ten digital outputs.
• Document the power supply characteristics to confirm compliance with the specified direct current voltage range.
• List any specific software versions or firmware requirements needed for programming the CPU module effectively.

• Cross-reference the net weight of zero point three nine four kilograms with shipping documentation requirements.
• Validate the product lifecycle status as active to ensure ongoing support and documentation review details.
• Review the source category path to confirm alignment with SIPLUS CPU 1214C classification standards.
• Ensure all technical parameters match the submitted inquiry form to avoid processing delays or errors.