Siemens 6AG1212-1BE40-4XB0 Industrial Automation Component

Part number

6AG1212-1BE40-4XB0

Brand

Siemens

Category

PLC CPUs & Controllers

Product type

PLC CPUs & Controllers

Lifecycle

Active Product

Dimensions

10.5 x 10.00 x 8.3 cm

Net weight

0.39 Kg

Source category

SIPLUS CPU 1212C

• Power supply accepts AC voltage between 85 and 264 volts at 47-63 Hz frequency. Keep dimensions 10.5 x 10.00 x 8.3 cm and net weight 0.39 Kg unchanged while comparing project documents and product image evidence.
• Onboard digital inputs consist of eight channels rated for 24 V DC signal levels.
• Digital outputs utilize six relay contacts capable of switching loads up to 2 Amperes each.
• Two analog input channels measure signals ranging from 0 to 10 V DC for process monitoring.
• Program and data memory capacity is recorded as 75 KB for user application storage needs.
• Physical dimensions are listed as 10.5 by 10.00 by 8.3 centimeters with a net weight of 0.39 Kg.

• Brand classification identifies this component as a Siemens industrial automation product line item. Use the source path Automation technology / SIPLUS standard CPUs / SIPLUS CPU 1212C to confirm catalog context, model family, parameter review scope, and technical inquiry preparation notes.
• Product type categorization places it within the PLC CPUs and Controllers segment of inventory.
• Lifecycle status indicates the model is currently active and supported for new inquiries.
• Source category path links this unit to SIPLUS standard CPUs and specific CPU 1212C variants.

Parameters are factual source fields retained for model review.

• Verify the AC power input requirements match your facility's electrical distribution system standards. Check product-owned images, label text, connector area, and submitted model references against the exact 6AG1212-1BE40-4XB0 record before publication.
• Check the relay output ratings against the load specifications of your connected actuators.
• Confirm the analog input voltage range aligns with your sensor signal output characteristics.
• Assess the memory size adequacy for your control logic and data handling requirements.
• Review the operating temperature limits to ensure suitability for your installation environment.

• Inspect the physical labeling on the device front panel for part number confirmation. Review Siemens 6AG1212-1BE40-4XB0 as PLC CPUs & Controllers with source category SIPLUS CPU 1212C, recorded lifecycle Active Product, and submitted model identity.
• Examine the terminal block connections for proper wiring access and designation clarity.
• Note the status LED indicators for diagnostic feedback during operational testing phases.
• Observe the mounting rail interface design for standard DIN rail installation application context checks.

• Prepare your project specifications including power supply details and load requirements for review.
• Document the environmental conditions where the controller will be installed for assessment.
• List any specific interface modules or communication adapters needed for your system architecture.
• Provide your contact information and preferred method for receiving technical clarification responses.

• Ensure all technical parameters are cross-referenced with your current system design documents.
• Confirm that the conformal coating specification meets your specific corrosion protection needs.
• Validate the relay output capacity against the maximum current draw of your loads.
• Submit detailed inquiry information to facilitate accurate technical support and documentation provision.